Transforming the Glass: a masterclass with Narcissus Quagliata [part 4]

Over the last few months, I was fortunate to be able to take part to a new masterclass organised by Narcissus Quagliata, one of the most significant contemporary artists in glass. I already talked about this class in a previous post, and showed some of the things Narcissus has taught me. In this last post, I will show you some of the final pieces I created.

My participation was generously supported by a Regional Arts Development Fund (RADF) Continue Creating 2022 grant managed by the Moreton Bay Regional Council, where I live. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

Here I am showing some pieces I have done in the last weeks where I exploit the lessons learnt from Narcissus and I combine them within my artistic practice. All these pieces are fused glass, in combination with glass stains and enamels, and picture some of the landscapes I encountered during my travels in Australia. The piece with the forest and the lake is inspired by the lake in the Bunyaville state forest reserve, behind the Glass Artistry studio.

My participation in Narcissus Quagliata Transforming the Glass masterclass was generously supported by a Regional Arts Development Fund Continue Creating 2022 grant. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

Transforming the Glass: a masterclass with Narcissus Quagliata [part 3]

Over the last few months, I was fortunate to be able to take part to a new masterclass organised by Narcissus Quagliata, one of the most significant contemporary artists in glass. I already talked about this class in a previous post, and showed some of the things Narcissus has taught me. In this post, I will show you some of the final pieces I created.

My participation was generously supported by a Regional Arts Development Fund (RADF) Continue Creating 2022 grant managed by the Moreton Bay Regional Council, where I live. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

The pieces above have been made predominantly by combining frits and lines (left image), and laces and lines (right image).

The pieces below have been by combining stackers and sliders (left image) and sliders, laces and frits (right image), achieving a look that reminds of impressionism art.

Although these are not complete creation, they give an idea of what can be achieved using innovative glass techniques for creating paintings.

The image below shows a piece before fusing in the kiln. In the piece you may recognise I have included some premade laces, while the remaining is created using glass frits and powders.

In the piece below you can see another example of combining premade laces with lines.

My participation in Narcissus Quagliata Transforming the Glass masterclass was generously supported by a Regional Arts Development Fund Continue Creating 2022 grant. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

Transforming the Glass: a masterclass with Narcissus Quagliata [part 2]

Over the last few months, I was fortunate to be able to take part to a new masterclass organised by Narcissus Quagliata, one of the most significant contemporary artists in glass. I already talked about this class in a previous post, and showed some of the things Narcissus has taught me. In this post, I will show you some more things.

My participation was generously supported by a Regional Arts Development Fund (RADF) Continue Creating 2022 grant managed by the Moreton Bay Regional Council, where I live. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

In the gallery above I have included some examples of laces I have made during the course. I already mentioned laces in the first post about this class; the laces there were mainly made with fine and medium frits. The laces in the gallery in this post, instead, are mostly done with medium and coarse frits. Laces make a great premade material to be incorporated into glass pieces.

Among the techniques we learned in the course, there has been also how to create lines with glass. I experimented with creating lines in different ways: with frits and powders, with stringers, and with a vitrograph kiln. A line is a key instrument for drawing and painting. A line creating with glass and heat is different from what you would do with a pen on a piece of paper, or even from what we can paint on glass with traditional stained glass methods. Some examples of the glass tests I created using lines (and combined with stackers and sliders, from the previous post) can be seen in the gallery below.

Then, I started combining the techniques I learned to make new glass creations. In the next two blog posts I will show you some of the final pieces I created.

My participation in Narcissus Quagliata Transforming the Glass masterclass was generously supported by a Regional Arts Development Fund Continue Creating 2022 grant. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

Transforming the Glass: a masterclass with Narcissus Quagliata [part 1]

Over the last few months, I was fortunate to be able to take part to a new masterclass organised by Narcissus Quagliata, one of the most significant contemporary artists in glass. My participation was generously supported by a Regional Arts Development Fund (RADF) Continue Creating 2022 grant managed by the Moreton Bay Regional Council, where I live. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

This 12 weeks intensive course focused on non-traditional painting on glass, using glass frits, powders and sheets in new ways. The course went through a number of key techniques to combine glass into unique creations. In this series of 4 posts, I will share some of the techniques I have experimented with and some of the first pieces I created combining these techniques into my artistic practice.

During the course, I experienced creating stackers and sliders: putting glass on top of glass and fusing them in the kiln (for sliders, this involves getting the glass to flow once hot). Key to the creation of stackers and sliders is the creation of movement, to make the glass come alive. In the gallery below, you can see some of examples of the stackers and sliders I have created. These make perfect premade material to use in new creations. I will show you how I end up using some of these pieces in the last 2 posts related to this class.

Another technique I learned is how to create laces. A lace is created using glass frit. The frit is first placed on a kiln shelf accordingly to the effects we want to create: this includes both varying colours and composition, and varying dimensions of the frits and thickness of its application. Then, the heat in the kiln and the laws of physics (including the fact that glass, once heated up, tends to aggregate and stay at a 6 millimeters of thickness) do the rest.

My participation in Narcissus Quagliata Transforming the Glass masterclass was generously supported by a Regional Arts Development Fund Continue Creating 2022 grant. The Regional Arts Development Fund is a partnership between the Queensland Government and Moreton Bay Regional Council to support local arts and culture in regional Queensland.

We moved! Glass Artistry is now based in Albany Creek

Long time not posting: we have been so busy — but it’s time for an update now.

We have moved to 35 Alpinia Ct, Albany Creek. Our new location does provide a great, spacious studio from which to operate. It is also a great location if you want to join us for classes, with the studio sitting right next to the Bunyaville Conservation Park: so you can come to do some glass and enjoy the local wildlife or go for a stroll in the forest while you take a break from glassmaking.

We are still in the process of finalising the studio setup, installing our kilns, sandblaster and new bench spaces — and of course some exhibition space and our glass library. We aim to have a studio opening in about 6 months time. But you are more than welcome to arrange an appointment any time before then for discussing your glass project, renovation, or needs.

2018 Stained Glass Conference

I had the pleasure to attend the 2018 Stained Glass Association of America (SGAA) conference in Long Beach, California in late June. It was such a great event (arrived to its 109th instalment), and I had the chance to meet other stained glass artists and conservators, all under one roof.

The conference featured many amazing and inspiring talks. I particularly enjoyed the talk by Judith Schaechter, who showed her work, the processes she uses and her sources of inspiration. I am a big fan of her work, and always enjoying visiting museums or galleries that exhibit her stained glass.

Some of the samples Judith Schaechter showed during her talk.

Some of the samples Judith Schaechter showed during her talk.

I also met again with Ariana Makau from Nzilani Glass Conservation, who I had visited few years ago in Oakland, California, for inspiration and insights about stained glass conservation. Ariana’s talk at the conference was focused on health and safety when exposed to lead: a big issue when working with stained glass, and in particular when doing conservation works. The talk flamed up lots of discussion, which demonstrates how important this issue is to stained glass makers and conservators.

Another talk I enjoyed was by Lindsy Parrot, from the Neustadt Collection of Tiffany Glass, in the Queens Museum, New Jersey, who spoke about the mosaics from the Tiffany Studios. I have visited the collection in the Queens Museum few year ago, and I talked about it in this blog post.

The conference also featured a number of classes. I enjoyed taking part to the Laminating class by Rich Lamonde, from Glass Strategies, and to the gilding demonstration by Alix Gomes from Angel Gilding.

One of the pieces I created during the Lamination class at the SGAA conference.

One of the pieces I created during the Lamination class at the SGAA conference.

 

Alix Gomes demonstrating the gilding technique.

Alix Gomes demonstrating the gilding technique.

The conference featured two banquets; the first took place at the Judson Studios. Before reaching the studio, we visited the Gamble House, a National Historic Landmark in Pasadena. The House is a masterpiece of the American Arts and Crafts movement, and features a strong focus on details and craftsmanship. The design of the house is influenced by Japanese aesthetic. We also visited the Bullseye Resource Centre located next to Judson Studios.

Glass racks at the Bullseye Resource Centre located next to Judson Studios.

Glass racks at the Bullseye Resource Centre located next to Judson Studios.

Once at Judson Studios, we had the chance to visit the building, and admire some of the work underway by Narcissus Quagliata.

A section of the impressive Judson Studios

A section of the impressive Judson Studios.

The conference ended with a one day tour of stained glass around the LA area. The tour started with the stained glass windows at the USC Caruso Catholic Center. The windows, recently designed and created by the Judson studio, feature stories from the Old and New Testament. Each window has been sponsored by a donor, who had input on the subject of the window, and provided reference material for example for some of the depicted  symbols and faces. The picture below capture some examples of these windows and details.

The tour then continued to the Cathedral of Our Lady of Angels, Los Angeles. In the basement of the cathedral are exhibited a number of stained glass panels by the Franz Mayer & Co of Munich, which where installed in the original Cathedral before being moved to the current location. The panels are beautiful and showcase the artistry of the Mayer studio. I will talk about these windows in a future post, where I will combine pictures taken during this tour with those I took in a previous visit to the Cathedral of Our Lady of Angels.

The tour finished at the Frank Lloyd Wright’s Hollyhock House, which features a number of original stained glass windows in the typical motifs of Frank Lloyd Wright.

I also enjoyed meeting and knowing new people. I thoroughly enjoyed talking with Tom and Gayle Holdman, from Holdman Studios, in Utah. I also enjoyed chatting with David Judson, owner of Judson Studios, one of the biggest and most famous glass art studios in the US. David was a wealth of knowledge about both traditional and new glass art techniques.

Tiffany Studio: lamps at Queens Museum, NY (The Neustadt Collection)

image-197In my 2017 trip to the USA, I made a stop to admire the The Neustadt Collection of Tiffany lamps, at the Queens Museum, in New York. The collection, assembled by Dr. Egon Neustadt (1898-1984) and his wife Hildegard (1911-1961), features a number of delightful copper foil lamps created by Tiffany Studios right in Queens (in Corona to be exact).

(more…)

A Trip into Heritage Stained Glass in the US and its Conservation

Thanks to the generous support from the Storylines Art Bursary by Mark Furner MP for Ferny Grove and the James Whitney Workshop/Seminar Scholarship by the Stained Glass School/Stained Glass Association of America, I recently had the opportunity to spend few weeks in the US to further my expertise in glass conservation, in particular for heritage stained glass.

During this trip I spent some time at the Corning Museum of Glass (NY), visiting and working with Stephen Koob, Fellow of the International Institute of Conservation and the American Institute for Conservation, who is responsible for the care and preservation of all of the Museum’s collections.

 

Under Stephen’ mentorship, I have practiced conserving some damaged glass objects, including a vessel created by Frederick Carder in his carrear at Corning. I also had a chance to visit the museum and assist to the end of residency demonstration by visiting artist Dane Jack (blown glass).

 

After my time in Corning, I travelled for few days to Boston, MA, visiting some churches with heritage stained glass on the way. In Boston, I had the privilege to see a number of stained glass panels by Tiffany and La Farge, among others, including some installed in Harvard University’s Memorial Hall, generally not open to the public.

Once left Boston, I travelled to New York where I visited the Bullseye Glass Resource Center New York, the Queens and Brooklyn Museums, and the Claire Oliver Gallery (a commercial gallery that is the sole representative of Judith Schaechter’s stained glass work).

 

After New York, I travelled to Bryn Athyn, PA; not before having stopped in Princeton, NJ to admire some great stained glass from Tiffany Studios, depecting St George, and in Millville, visiting WheatonArts – the Museum of American Glass.

 

Once in Bryn Athyn, I had the opportunity to participate in a heritage stained glass conservation workshop, lead by Steve Hartley, with the help of Kenneth Leap. In the workshop, we had the opportunity to work on and examine a number of medieval and heritage stained glass panels. I also had the chance to return to Philadelphia to admire Tiffany’s Dream Garden mosaic and some stained glass in a church and in the local museum.

Next, I continued my trip and I drove to Washington, where I returned to visit the Washington National Cathedral, including the Stained Glass Association of America’s annual exhibition. Details of glass panel by Kathy Barnard below.

1

Finally, I concluded my journey in Los Angeles.  There I visited the St. Timothy’s Catholic Church, which has several Harry Clark’s windows, and the Forest Lawn – Glendale – Great Mausoleum. There, I had the chance to see ‘The last supper’, the famous painting of Leonardo da Vinci, but in the form of a stained glass window. The museum also had on exposition a few wonderful panels by Franz Mayer & Co. of Munich — but the greatest collection of Mayer’s windows in Los Angeles was in the Cathedral of Our Lady of the Angels. A true art supper for the stained glass lovers.

IMG_8771

I will post on this blog some stories and images from my trip, including images of Tiffany’s stained glass and lamps, La Farge stained glass masterpieces, fantastic glass artworks from the Corning Museum of Glass, and much more. So, keep looking!

The Positive Symbolism of the Peacock – A Wedding Commission

The peacock bowl

Few months ago, I had the great pleasure of designing and realising a very special wedding gift: a Peacock Bowl. I started by creating about 11 different designs (see some examples below); after few hard decisions, the customer set on one design.

A design for the peacock plate

A design for the peacock plate

Another design for the peacock plate

Another design for the peacock plate

Before taking this commission I was wondering about what the peacock represents in the symbolistic tradition, iconography, and across cultures; so I searched for more information about positive meanings associated with the peacock.

In my searches, I discovered that this beautiful bird is a symbol of dignity and grace. In the Chinese and Buddhist cultures, the peacock represents freedom and wisdom; in other cultures it is also thought as a symbol of eternal life.
Beyond these, the peacock is also the symbol of beauty, good luck, compassion and kindness. The peacock is also often used to represent wholeness, patience and nurturing.

Detail of the selected design for the peacock plate

Detail of the selected design for the peacock plate

Detail of the design of the feathers

Detail of the design of the feathers

 

 

 

 

 

 

 

 

 

 

In some cultures this elegant bird is seen as bringing the message that there are no limits to our dreams and anything is possible if we believe and trust the universe.

I think the peacock resembles a very powerful mix of symbolism and beauty and it offers a powerful message to the newly wedded couple.

Details of the feathers in the peacock plate

Details of the feathers in the peacock plate

Details of the feathers in the peacock plate

Details of the feathers in the peacock plate

 

 

 

 

 

 

 

From the selected design I create a kiln fused glass bowl, which was further engraved to emphasise the texture of the feathers, along with the wishes from the client that commissioned the gift.

The peacock plate

The peacock plate

“The Visitation” at The Cloisters

The stained glass window “The Visitation” at the Metropolitan Museum/Cloisters (New York City) captures a scene from the life of the Virgin Mary described in the Gospel of Luke. I saw this window in my recent travel to the US last September and it particularly fascinated me. This is the first of a number of blog posts I will dedicate to my 2016 US trip.

 

The Visitation @ Met Cloisters; full window.

The Visitation @ Met Cloisters; full window.

If you are not familiar with the story of the visitation, here is a brief version, before we get to look at the window. After the Annunciation, Mary leaves Nazareth and goes to the city of Judah to visit her cousin Elizabeth. In the Christian symbolism, Mary’s visit represents her intention to bring the divine grace to Elizabeth and her unborn son. At that time, in fact, both women were pregnant; Mary carried Jesus and Elizabeth was pregnant with  John the Baptist.

I just love the climate of this stained glass window: there is something warm in it.  The window transpires compassion, calm and joy. The women are holding their hands and touching the arms, witnessing the strong friendship between Mary and Elizabeth, along with their familiarity and fondness.

The Visitation @ Met Cloisters; detail of faces and hands.

The Visitation @ Met Cloisters; detail of faces and hands.

The faces of Mary and Elizabeth are very delicately painted. Their traits are brushed up with only simple lines but they still are very beautifully executed. The chance in pressure of the brush when the paint was applied to the glass produced lines of different width, creating a sense of movement and dimension. This may give you the feeling that this window is rather “modern”, but instead it dates back to the late medieval time (1444).

The stained glass originally was installed at the Carmelite Church in Boppard-am-Rhein (Germany); now the window is conserved at The Met Cloisters in New York City. The window is also important in the stained glass history because with the use of an angular style in the drapery folds and the juxtaposition of colours, the author initiated a new glass painting style in the Middle Rhine region.

Sunrises and Sunsets in Fraser Island

IMG_1811

Inspired by a recent visit to Fraser Island and by some magnificent sunsets and sunrises I had the luck to see, I created a new glass and metal sculpture. The sculpture is a cube and each edge represents one of those wonderful sunrises and sunsets in Fraser. Inside the cube there is a LED light I designed. In addition to the main large cube, I have also created some smaller cubes, all in glass.

cube

The glass sculpture is currently on display and available for purchase at Sydney’s Glass Artists’ Gallery.

IMG_1745

Restoration of Leadlight in Paddington

This leadlight really needed urgent attention. As you see from the two pictures below, the lead had cracked and bowed, and some of the glass pieces have gone out of the lead came. The leadlight was installed on a door in a cute worker cottage in Paddington; being on a door, the leadlight was subject to frequent movement.

IMG_0252 IMG_0250

 

 

 

 

 

 

 

 

 

 

 

After removing the leadlight, I completely rebuilt the panel, using new lead and replacing the broken glass. The panel was then reinstalled in place with the help of John from JayBee Woodworks, who restored the timber trims. You can see the great result in the photo below.

IMG_0537

Coasters for Zena’s 12th birthday

Ready for shipping!

Zena, the beloved pharaoh hound of my dearest friend Maureen Cahill, owner of the Glass Artists’ Gallery in Glebe (Australia’s foremost contemporary glass gallery), has turned twelve. To celebrate Maureen commissioned me to design and create some celebratory glass coasters for Zena to give to her personal friends.

The coasters to celebrate Zena's 12th birthday.

The coasters to celebrate Zena’s 12th birthday.

I created two designs – one with Zena’s profile and the other picturing Zena in her famous sphinx pose (see Zena’s picture below, taken few years ago). The glass coasters have been created with coloured glass powders and fused in the kiln. Afterwards, the coasters have been engraved to highlight Zena’s profile and Zena’s name has been sandblasted on the glass.

Zena in her famous regal pose; image by Jill Carter-Hansen.

Zena in her famous regal pose; image by Jill Carter-Hansen.

And below, my studio assistant Darra gives his seal of approval on the consignment.

Darra gives his seal of approval.

Darra gives his seal of approval.

Queensland Resource Council Awards

I was pleased to be contacted by the Queensland Resources Council to created a series of gifts for their Resources Awards for Women awards, ahead of the QRC/WIMARQ International Women’s Day Breakfast event. The commission of 6 bowls was based on my kiln-formed open plates series (plates from this series were also commissioned by the Queensland Government in 2014 for gifting some G20 representatives, see my previous blog post). The new plates for this award had to capture the colours of Queensland’s soil and geological resources, as well as violet, the colours symbols of the suffragettes movement.

One of the plates created for the Queensland Resources Council.

One of the plates created for the Queensland Resources Council.

The breakfast was held on May 8, 2016 when the trophies were presented to all the winners (congratulations from Glass Artistry). In the photo gallery below you can see few more images of some of the plates and the winners.

Leadlight restoration at Our Lady of Victories is now finished!

We have now finished the restoration of the leadlight windows at Our Lady of Victories in Bowen Hills, Queensland. The heritage-listed church was hit by the violent thunderstorm that devastated many Brisbane suburbs in November 2014. The image below show some of the damages done to the church’s window as we photographed in our original survey.

Broken windows at Our Lady of Victories, Bowen Hills (QLD)

Broken windows at Our Lady of Victories, Bowen Hills (QLD)

Damaged leadlight panel, Our Lady of Victories, Bowen Hills (QLD).

Damaged leadlight panel, Our Lady of Victories, Bowen Hills (QLD).

Damaged semicircle leadlight, Our Lady of Victories, Bowen Hills (QLD).

Damaged semicircle leadlight (fanlight), Our Lady of Victories, Bowen Hills (QLD).

 

 

 

 

 

 

 

The restoration involved repairing more than 80 windows. Of these, most were removed from their original timber casements for reconstruction, while attempting to salvage as much original glass as possible, and match the new glass with the original one. Those with minor damage and no structural concern to the lead were repaired on-site.

The matching was not easy: the windows were originally crafted by the RS Exton Studios, a painters and decorators trade who used to have their warehouse in Brisbane CBD and closed their stained glass business in 1958. The windows of the church date back probably to 1924. The original glass is not produced anymore, and the production processes and colours have since then changed. We managed to recoup some old glass through some stock we had acquired from older stained glass businesses and some demolition yards. However, for a large quantity of glass, we had to commission a custom manufacturing to some glass companies in the US to be able to match the original glass as close as possible. David from Hartley and Williams was of great help in coordinating the sourcing of this glass.

Rebuilding one of the main leadlight panels

Rebuilding one of the main leadlight panels

On the way to remove leadlights from the tower.

On the way to remove leadlights from the tower.

 

 

 

 

 

 

 

 

 

The main damages were concentrated on the south side of the church; however a number of windows throughout the floors of the church’s tower were also damaged; their restoration involved the use of a crane to remove the windows, replace them with temporary perspex (transparent acrylic sheets), and after few weeks replace the restored windows in place.

On-site reparations at Our Ladies of Victories.

On-site reparations at Our Ladies of Victories.

When we remove the panels, we place temporary perspex to keep the weather out and the sunlight in.

When we remove the panels, we place temporary perspex to keep the weather out and the sunlight in.

 

 

 

 

 

 

 

 

 

 

 

An example of a poor reparation, carried out in the past, using silicone and cardboard to fill the gap left from a broken glass

An example of a poor reparation, carried out in the past, using silicone and cardboard to fill the gap left from a broken glass.

Through the restoration process it became evident that the windows had undergone several reparations in the past, not all carried up to the highest standard. Some glass was replaced with glass that was of completely different tonalities when compared with the original glass, compromising the original history of the windows. Other glass was installed using glues or silicones: this practice is not just an eyesore, but it also puts under serious risks the integrity of the lead that gives the structure to the windows.

 

Previous repairs have not put much attention in maintaining the original characteristics of the windows: here you can see a clear colour miss-match for one of the diamond shaped glass from a panel in the church's tower.

Previous repairs have not put much attention in maintaining the original characteristics of the windows: here you can see a clear colour miss-match for one of the diamond shaped glass from a panel in the church’s tower.

Another patchwork of colours due to previous poor quality repairs. It is always difficult to match colours that are not produced anymore, but the differences in colours of the glass used for previous reparations is way too big.

Another patchwork of colours due to previous poor quality repairs. It is always difficult to match colours that are not produced anymore, but the differences in colours of the glass used for previous reparations is way too big.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Damaged semicircle leadlight, Our Lady of Victories, Bowen Hills (QLD).

Damaged semicircle from Our Ladies of Victories in Bowen Hills (QLD).

One of the restored large semicircle leadlight (fanlight).

One of the restored large semicircle leadlight (fanlight).

 

 

 

 

 

 

The damaged windows are now all restored to their original appearance. The larger windows are composed from two strips of four top-hinged hoppers, mostly filled with green diamond mullioned glass. The green colour of the windows is to commemorate the armed forces of World War I. Above these panels is placed a semi circular window glazed with a leadlight panel depicting a rising sun, which, continuing with the commemoration of the WWI armed forces, recalls the symbol of the First Australian Imperial Force AIF.

Some of the restored leadlight windows at Our Lady of Victories, Bowen Hills (QLD).

Some of the restored leadlight windows at Our Lady of Victories, Bowen Hills (QLD).

Our Lady of Victories, in Bowen Hills (QLD).

Our Lady of Victories, in Bowen Hills (QLD).

The church's cross, which was also damaged in the 2014 hail storm, is now back on the top of the tower.

The church’s cross, which was also damaged in the 2014 hail storm, is now back on the top of the tower.

 

 

 

 

 

 

 

 

 

 

 

 

 

Yeronga’s Heritage Queenslander Restoration

I have recently completed the restoration of 6 leadlight panels from a heritage Queenslander home in Yeronga, Brisbane, built in 1924. The panels have a lovely floral motif and intense purple and aquamarine colours. While the panels were not damaged in the 2014 Brisbane hailstorm that heavily damaged a lot of heritage stained glass windows in the area, they did suffer the harsh Queensland sun and the lead was crumbling down.

One of the leadlight panel before restoration. The lead is crumbling.

One of the leadlight panel before restoration. The lead is crumbling.

Detail of one leadlight panel showing bowing in correspondence of the flower motif.

Detail of one leadlight panel showing bowing in correspondence of the flower motif.

 

 

 

 

 

 

 

 

 

 

 

 

Interestingly, the same motif was present in other leadlight windows around the house’s veranda: these windows were in immaculate conditions because soon after building, the veranda was enclosed to add more indoor space to the house.

Restored leadlight panels and timber frame casements installed in place at the heritage-listed Yeronga residence.

Restored leadlight panels and timber frame casements installed in place at the heritage-listed Yeronga residence.

The restored windows shining through the night.

The restored windows shining through the night.

 

 

 

 

 

 

One of the leadlight panel during the rebuilding phase.

One of the leadlight panel during the rebuilding phase.

 

 

 

The restoration of these windows  was carried out in 6 weeks and all the panels were rebuilt from scratch maintaining the same width and type of lead cames. Few glass pieces were broken but fortunately we were able to match the original glass with some heritage glass we had in stock in Glass Artistry’s studio, thus maintaining the original design: at Glass Artistry, we always strive to matching the glass that needs replacement as close as possible.

The restored leadlight windows installed in the Yeronga house.

The restored leadlight windows installed in the Yeronga house.

Along with the restored panels, we provided to the owners a full report detailing the status of the windows. We also organised for the restoration of the original timber frames of the leadlight windows. Once we removed the leadlight, my collaborator John Britnell from JayBee Woodworks took all silky oak frames apart, brought them back to bare timber, reconstructed the damaged portion by inserting matching silky oak. John then stained the internal part of frames by carefully recreating the original stained and also recoated the external part of the frames.

John from JayBee Woodworks completing the installation of a leadlight panel into its timber frame casement.

John from JayBee Woodworks completing the installation of a leadlight panel into its timber frame casement.

John and I applying the last touches to the restored timber frames with the installed leadlights.

John and I applying the last touches to the restored timber frames with the installed leadlights.

 

 

 

 

 

 

 

 

 

 

The owners of the restored leadlight panels sent me a very kind email of appreciation of the restoration works:

Hi Magda,
As you know, both Shirley and I are extremely happy with the service you have provided in the restoration of our windows.  You showed the utmost care, from understanding our needs at the beginning of the project, through to the planning and execution of the work.
Your skill and artistry has added a great deal of heritage value to our home, and we would not hesitate to recommend your services.
So, thank you again for your professionalism and for the obvious passion you have for your craft, you really looked after us.
All the best for the future, and our sincerest gratitude for all your efforts.
Warm regards,
Luke Harrison
 

The restored leadlight panels ready for installation.

The restored leadlight panels ready for installation.

Harry Clarke, in Glasgow

In my recent trip to Europe, I visited Glasgow, Scotland. I used to live and work in Glasgow few years ago, and it was there that I specialised in art glass design and worked in great glass projects for the Verrier Glass Studio, including the creation of leadlight windows and the restoration of heritage stained glass in Glasgow.

Harry Clarke's stained glass "The Coronation of the Blessed Virgin", at Glasgow's Kelvingrove Museum, Scotland.

Harry Clarke’s stained glass “The Coronation of the Blessed Virgin”, at Glasgow’s Kelvingrove Museum, Scotland.

Harry Clarke's stained glass window "Ascension", at St Stephen Cathedral in Brisbane, Queensland.

Harry Clarke’s stained glass window “Ascension”, at St Stephen Cathedral in Brisbane, Queensland.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

It was to my great joy that a beautiful stained glass window by Irish artist Harry Clarke was on display at the Kelvingrove museum. Harry Clarke (17 March 1889 – 6 January 1931) was a proficient stained glass artist and he created more than 130 windows which are characterised by rich colours (especially deep blues), fine drawings and the integration of the lead cames themselves into the design of the stained glass window (which remind the heavy lines in his black&white book illustrations). An example of Clarke’s stained glass windows is also in the St Stephen’s Catholic Cathedral in Brisbane (known as the “Ascension” or “Mayne” window, because in memory of Isaac and William Mayne). This window was commissioned to Clarke and imported from Ireland in the early part of the twentieth century (about 1923).

The window in Glasgow is titled “The Coronation of the Blessed Virgin” and, as the Brisbane’w window, it also was realised in 1923, as recorded along with Clarke’s signature in the bottom right corner of the rightmost panel (see image). The window is made up of 20 panels and was originally installed in the Convent Chapel in the Teacher Training College in Dowanhill Glasgow, Scotland, but has now been removed and is assembled into an exhibition frame in Glasgow’s Kelvingrove Museum. The window was commissioned by Sister Mary of St Wilfrid of The Sisters of Notre Dame and Principal of the Teacher Training College.

Detail of the faces of the Virgin.

Detail of the faces of the Virgin.

Detail of two praying people.

Detail of two praying people.

 

 

 

 

 

 

 

 

 

 

 

The window contains all the motifs that make Clarke’s work famous around the word: the deep blue colours of the Virgin’s dress, the delicate drawings of the faces of the people pictured in the window (see the details in the images above), and the inclusion of the lead as integral part of the design, for example dictating the flow of the Virgin’s dress and the drip of water in the central panel.

Detail from Harry Clarke's “The Coronation of the Blessed Virgin” at The Kelvingrove Museum in Glasgow, Scotland.

Detail from Harry Clarke’s “The Coronation of the Blessed Virgin” at The Kelvingrove Museum in Glasgow, Scotland.

Harry Clarke's signature on the window, with date.

Harry Clarke’s signature on the window, with date.

 

 

 

 

 

 

 

 

 

 

 

 

 

New Murano Millefiori Glass Range in Stock

We have now plenty of new, authentic Murano Millefiori in stock, along with compatible Murano sheet glass that you can use in combination with the millefiori to create your own fused glass project. You can see some of the millefiori we have in stock in our Etsy shop; if you want to see more, get in touch with us.

Fantasia di Murrini

Fantasia di Millefiori (“millefiori fantasy”)

The millefiori can be used to create mosaics, jewellery, plates and any fused glass art project.

Sky blue millefiori.

Sky blue millefiori.

Lime green millefiori.

Lime green millefiori.

 

 

 

 

 

 

 

 

Levender millefiori.

Levender millefiori.

Letter mix millefiori.

Letter mix millefiori.

 

 

 

 

 

 

 

 

Stained Glass Restoration at Holy Trinity Anglican Church, Woollongabba

Recently I have restored some stained glass panels for another Brisbane’s leadlight studio, following a previous reparation I did for them for a panel in the church of Auchenflower-Milton. I was asked to recreate the paintings for two small panels from the Holy Trinity Anglican Church in Woollongabba, while they would have taken care of the re-leading of the panels and the installation in the church. The stained glass windows were damaged during the wild hailstorm that hit Brisbane in November 2014.

Left damaged leadlight panel from the Holy Trinity church in Wooloongabba (QLD).

Left damaged leadlight panel from the Holy Trinity church in Wooloongabba (QLD).

Right damaged leadlight panel from the Holy Trinity church in Wooloongabba (QLD).

Right damaged leadlight panel from the Holy Trinity church in Wooloongabba (QLD).

 

 

 

 

 

 

 

 

 

 

 

The two panels picture two kneeling angels holding a papyrus paper with a writing to commemorate the memory of Wellington and Amily Wilham, parents of the original window’s commissioners. The elaborated wings of the angels are turquoise, their dress is acid green and the faces are delicately painted.

Detail of the face of the angel in the right stained glass panel.

Detail of the face of the angel in the right stained glass panel.

The small panels were brought into Glass Artistry’s studio with damages to the face of the left angel and the wing of the right angel. Also the glass containing the dedication message was scattered into a number of small pieces, and other smaller border pieces with decorative leaves were also irreparably broken or missing. In total, there were about 30 glass pieces broken that required to be recreated.

The original damaged head of the angel on the left panel (Left) and the one I painted (Right).

The original damaged head of the angel on the left panel (Left) and the one I painted (Right).

Left panel and the newly painted pieces.

Left panel and the newly painted pieces.

 

 

 

 

 

The two stained glass panels with the newly painted pieces substituting the damaged ones.

The two stained glass panels with the newly painted pieces substituting the damaged ones.

 

Stained Glass Restoration at Anglican Parish of Auchenflower-Milton

Recently I have restored some stained glass panels for another Brisbane’s leadlight studio. I was asked to recreate the paintings for a large stained glass window from the Anglican Parish of Auchenflower-Milton, while they would have taken care of the re-leading of the window and its installation in the church. The stained glass window was damaged during the wild hailstorm that hit Brisbane in November 2014.

Window with the newly painted pieces in position before leading the panel together.

Window with the newly painted pieces in position before leading the panel together.

The window depicted the baptism of Christ. Many of the glass pieces were missing or were completely broken, and an accurate photographic documentation of the original window did not exist, making the restoration complex. Indeed, only a low resolution picture, taken at an angle, was available (see below).

The only image available of the original window was of poor quality and taken at an angle. Here, it's a colour printout at real scale dimensions.

The only image available of the original window was of poor quality and taken at an angle. Here, it’s a colour printout at real scale dimensions.

The newly painted pieces created to substitute the original glass pieces damaged by the hailstorm.

The newly painted pieces created to substitute the original glass pieces damaged by the hailstorm.

 

 

 

 

 

 

 

Detail of the restoration. Original arm of John the Baptist (Top) and the new painted piece as replacement (Bottom).

Detail of the restoration. Original arm of John the Baptist (Top) and the new painted piece as replacement (Bottom).

Detail of the restoration. Original face of John the Baptist (Left) and the new painted piece as replacement (Right).

Detail of the restoration. Original face of John the Baptist (Left) and the new painted piece as replacement (Right).

 

 

 

 

 

 

 

 

Detail of the restoration. Original belt from the dress of Jesus (Top) and the new painted piece as replacement (Bottom).

Detail of the restoration. Original belt from the dress of Jesus (Top) and the new painted piece as replacement (Bottom).

 

Detail of the restoration. Original cup with holy water (Left) and the new painted piece as replacement (Right).

Detail of the restoration. Original cup with holy water (Left) and the new painted piece as replacement (Right).

 

Glass Linocuts @ Glass Artists’ Gallery

I have been invited to realize a number of creations for the Glass Graphics exhibition at the Glebe’s Glass Artists’ Gallery, Australia’s foremost contemporary glass gallery. The exhibition featured artists working in glass who have developed print techniques as a main focus for ideas in their work.

Lemons - Glass Linocut

Lemons – Glass Linocut

Lemons - Linocut graphic

Lemons – Linocut Graphic

 

 

 

 

 

 

 

 

 

 

The exhibition featured my Glass Linocut creations: casted glass created from the same matrix used to print linocut graphics. The image above on the left shows the glass linocut Lemons, casted using grey transparent glass, and mounted on a Queensland cedar L frame, kindly realised by Gaetano Moschella. The image above on the right shows the graphics version of Lemons, which was printed from the same linocut matrix used to “print” on the glass.

Colourful Lemons - Glass Linocut

Colourful Lemons – Glass Linocut

Colourful Lemons (detail) - Glass Linocut

Colourful Lemons (detail) – Glass Linocut

 

 

 

 

 

 

 

 

 

 

Each glass piece is matched by a linocut graphic printed on paper (in a limited edition series); both the glass linocut and the linocut graphic are signed.
The glass linocuts were created in a technique I purposely developed for this exhibition and are one of a kind.

The glass linocut Colourful Lemons is a coloured version of the glass piece Lemons. It is also several centimeters smaller than the grey-glass cast, although it was “printed” using the same linocut matrix used to create the larger piece (and the traditional paper graphics). It took me long to develop this “shrinkage” – this technique allows me to reproduce a large linocut into smaller glass pieces. The Colourful Lemons sits into an elegant flame sheoak timber base purposely made by Gaetano (also this timber was sourced from Queensland).

Apples - Glass Linocut

Apples – Glass Linocut

Apples - Linocut graphic

Apples – Linocut Graphic

 

 

 

 

 

 

 

The Fruit Series - Linocut Graphics

The Fruit Series – Linocut Graphics, printed on paper and framed

Chinese Lantern - Glass Linocut

Chinese Lantern – Glass Linocut

Along with the glass linocuts inserted into the timber bases, I also created some glass linocut tiles or coasters (see the image below). These glass tiles were created with the same technique used for the pieces above, but only using part of the original linocut matrix.

Glass Linocuts Tiles

Glass Linocuts Tiles

Along with my creations, the Glass Graphics exhibition included work of Lee Howes, Jessica Mackney, Wayne Pearson, Lorry Wedding-Marchioro and others. All the Glass Linocut series, along with the matching linocut graphics, are currently exhibited at the Glass Artists’ Gallery in Glebe and are available for sale.